Need Help! HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?


Results 1 to 2 of 2

Thread: HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?

    Hello everyone,

    I want to mark a flask using a Bodor laser marking machine, but I don't know the parameters that I need to use. Because of the small angle of the flask it doesn't mark properly and there are some parts where it makes thin lines.
    The program that I'm using is EZCAD2.exe and I know that I have to use one of the options for the rotary mark but I can't define which one.
    I attached some pictures of the tests I've made and the machine I'm using.
    I hope you can help me.

    Thank you.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?

    HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?-1-jpgHOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?-1-jpgHOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?-2-jpgHOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?-3-jpgHOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?-4-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?

HOW DO I MARK A FLASK USING BODOR LASER MARKING MACHINE?