technical question about laser


Page 1 of 2 12 LastLast
Results 1 to 12 of 23

Thread: technical question about laser

  1. #1
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default technical question about laser

    Hi everybody,
    I know many users have a chinese laser, maybe it's a problem for you when you see chinese on software or panel.
    Today I will teach you how to change the language on panel.
    http://www.thunderlaser.com/troubles...chinese-2.html

    Similar Threads:
    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  2. #2
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi,everyone.This is Amy from Thunderlaser.
    Some customers asked me how can I know how long will it cost it cost to make a working piece.(before I start the laser)
    Now I will show you how to calculate working time.

    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  3. #3
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Pass- Through Door Design
    Just imagine someday when you need to cut a super long material and the table of your laser cutter is not long enough, what can you do? Using a saw to cut the material into small pieces first? That would be a waste of time and might damage the material a lot.
    Don’t tell me that your laser cutter does not have a pass through door design! All Thunder laser cutters has a pass through door design to deal with such case, you can learn how to use this function easily from this video.


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  4. #4
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi,all
    I will teach you how to Draw Simple Graphics on laser cutter software rdworks v8 tutorial 01


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  5. #5
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi
    If your laser cutter's LCD panel is in Chinese,it might cost you lots of time to set to English.Now Thunder laser will show you how to change Chinese to English just in a few seconds.
    Step 1. click "Z/U" button
    Step 2. select"语言设置" and then press "Enter" to confirm
    Step 3. select "英文" and press "Enter" to confirm
    Now it's in English
    You can learn more details from this link:It is not find the information you need.-


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  6. #6
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi everyone, this is ken from Thunderlaser. In this lesson, we are going to learn how to engrave a photo. Let’s load a photo first. Click import button and select a photo. Then click open. Now we can set the size of the photo and then click “BMP” button.
    Then tick “set output resolution” and input the resolution as 1000.it is suggested to set the resolution between 1000 and 1500. Then click “Dither” and choose “Net graphic” and set the Frequency as 30. Then click “Apply to view” and enlarge the photo to check the detail. We can see the dot size is too big. Now we can change the frequency to 50. The quality is much better now. Usually, it’s suggested to set the frequency between 50 and 70. If we need to engrave transparent materials like acrylic, we should tick the “invert color”.
    And that’s all for today. See you.


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  7. #7
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default laser cutter useful tips/experience

    Hi,everyone..Some customers asked me how can I know how long will it cost cost it cost to to make a working piece.(before I start the laser)
    Now I will show you how to calculate working time.


    Last edited by Nolan Yang; 11-17-2016 at 03:56 AM.
    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  8. #8
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    today i show the video how to Change the Layer !


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  9. #9
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Thunder laser will keep providing you the most professional and easily understanding guiding videos on how to use a laser cutter


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  10. #10
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi everybody, this video will teaching everyone how to Flip an Object


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  11. #11
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hi everybody,
    this video will show to how to Select Objects of Same Color



    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  12. #12
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    582
    Downloads
    0
    Uploads
    0

    Default Re: technical question about laser

    Hello, everyone, this is ken from Thunderlaser. Now we will learn how to change the criterion of coordinate.


    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

technical question about laser
technical question about laser