Hi all,
I'm trying to align the mirrors and have first mirror dead on but when I try to hit mirror 2 I have not idea where the beam is hitting. Can anyone tell me how to even start adjusting first mirror so it will hit mirror 2.
hi there
for new adjusting the beam if it does not hit a mirror I take a strip of ply and just hold it right in front of mirror #2 does gives you a idea where the beam is going.
then adjust mirror # 1 so that the beam hits the strip of ply somewhere on the area of mirror #2 from there you use the mirror # 2 to adjust mirror # 1 to bring the beam dead center on mirror #2 in front and back of the machine and so on
greetings
waltfl