Need Help! Help for k40 laser engraver/cutter


Results 1 to 4 of 4

Thread: Help for k40 laser engraver/cutter

  1. #1
    Registered
    Join Date
    Nov 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Help for k40 laser engraver/cutter

    Hello,

    I am new in this engraving hobby and need a lot of help.
    i started the engraving, but, after 10-20 seconds it is fading.

    Please, see picture

    also, what are the steps for engraving and cutting at the same time?
    Step by step instructions please, since this is my first time.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Help for k40 laser engraver/cutter-image-jpg  


  2. #2
    Registered
    Join Date
    Nov 2008
    Location
    US
    Posts
    382
    Downloads
    0
    Uploads
    0

    Default Re: Help for k40 laser engraver/cutter

    HI THERE
    FIRST YOU NEED TO ALLIGNE YOUR BEAM. next you only can do one at the time first engraving then cutting to be selected in the layer menue ( right side it works from top to bottom.)
    send me a PM then I can send you picture instruction to align the beam.
    greetings
    waltfl



  3. #3
    Registered
    Join Date
    Nov 2014
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Help for k40 laser engraver/cutter

    Hello, I couldn't send you a PM.
    I ll try to align the beam in the morning.

    Do you know where I could get step by step (for dummies!) instructions on how to cut?
    Thank you do much



  4. #4
    Registered
    Join Date
    Nov 2008
    Location
    US
    Posts
    382
    Downloads
    0
    Uploads
    0

    Default Re: Help for k40 laser engraver/cutter

    hi there
    PM its open now I did not know its full
    greetings
    waltfl



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help for k40 laser engraver/cutter

Help for k40 laser engraver/cutter