Alex,
Looks the same as a Vectorsoft unit, there is a good chance they are out of business.
Jeff...
Hi there
Could anyone please help me to identify this controller.
I am trying to restore a machine to working order & it is missing the handset that attaches to this. The serial connector just goes to a cutoff piece of cable.
Also I will need to try & find some software to drive this. Does any one have any idea where I might find this.
I was wondering if it would be better just to get a new one, however I would like to keep most of the breakout circuitry if possible as it all seems to be working.
The machine powers up & starts moving to the home position.
Any help would be appreciated.
Thanks
Alex
Similar Threads:
Alex,
Looks the same as a Vectorsoft unit, there is a good chance they are out of business.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Well I wasn't able to find anything on the internet about Vectorsoft. (It definately looks like the same unit.)
Does any-one have any sugestions about what would be the best way to go with this.
Thanks
Alex
Alex,
Looks like its time to find a replacement controller, such as Ethernet Smoothstepper and Mach3.
Documentation
Or a Kflop:
Dynomotion Motion Control Boards for CNC Manufacturing and Robotics Applications
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.