Leetro 6515 firmware Upgrading & Installing

[Melody-gweike]

HI, If you have problems with your 6515 firmware, then you can use these two files. Also they can be used for downgrading from other version.

Step 1:Copy the updated firmware data to the root directory of
USB flash disk (Recommendation: do not save other files to the flash
disk);

Step 2: Turn of the machine

Step 3: Plug USB flash disk into MPC6515

Step 4: Turn on the machine

Step 5: After about 1 minutes, remove the USB flash disk, DSP firmware program will be started.

Similar Threads:

• Need Help!- CO2 Laser with Leetro 6515 - Software problems
• Build Thread- Leetro 6515 Card Pin Definations
• Need Help!- Installing a Leetro mpc6525(6515)" USB controller
• Need Help!- Lost control, XYZ-1280 Leetro MPC 6515 board.
• LinkMotion and Leetro 6515 CO2 laser controller

[ersanseker]

sry.. i try but didnt firmware upgrade

[jarrfa]

thanks for your cooperation
BUT PLS WOULD YOU MIND TO EXPLAIN ME THE OPERATION

[cnccraft]

After spending 8 months trying to get a Leetro 6515 to work after it decided that it no longer recognizes its "Soft Dog" (and getting no useful help from Leetro themselves) I decided to chuck the stupid thing. I replaced both my controllers with Sinjoe AWC780Plus controllers. I will never touch a Leetro controller again as long as I live. Their support sucks and they simply washed their hands of the problem. Whenever a customer tells me that he is having a problem with a Leetro controller I tell him to replace it with a Sinjoe controller.

[nw320]

Tnx
I will try it,
I hope its working

best regard

[DorielX]

tanks you.
have also the dll for thid version?