Need Help! 80w chinese Y axis near/far field beam alignment


Results 1 to 5 of 5

Thread: 80w chinese Y axis near/far field beam alignment

  1. #1
    Registered
    Join Date
    Sep 2011
    Location
    United States
    Posts
    65
    Downloads
    0
    Uploads
    0

    Exclamation 80w chinese Y axis near/far field beam alignment

    Hello, I am trying to get my laser's beam aligned and its proving to be pretty difficult for me. I took the laser tube out and put in a red laser pointer. I also constructed an arm with a crosshair in it that i can put in place for near field alignment. I have the red laser hitting the center of mirror one, and i'm trying to get mirror two aligned. I have it nearest the first mirror and aligned it to hit the center. I took the mirror out and put a piece of tape with a mark on it to show where the dot is hitting. I then moved the gantry all the way to the front, but I can't seem to get it dialed in. the beam is about 3mm up and 1mm to the right.

    Anyone have any tricks I could try out?



    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2012
    Location
    China
    Posts
    387
    Downloads
    0
    Uploads
    0

    Default Re: 80w chinese Y axis near/far field beam alignment

    we have alignment vidoe http://www.wklaser.com/vid_59.aspx .hope this can help

    Lucy Lee G.WEIKE LASER
    han@wklaser.com


  3. #3
    Member
    Join Date
    Feb 2014
    Location
    China
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default Re: 80w chinese Y axis near/far field beam alignment

    below video is for our laser machine align the laser beam for your reference:

    good luck

    www.thunderlaser.com


  4. #4
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: 80w chinese Y axis near/far field beam alignment

    the first thing you need to do is make sure all your mirrors are at th same height. One of mine was a little lower and I couldn't get it to align.



  5. #5
    Registered
    Join Date
    Sep 2011
    Location
    United States
    Posts
    65
    Downloads
    0
    Uploads
    0

    Default Re: 80w chinese Y axis near/far field beam alignment

    Quote Originally Posted by fixtureman1 View Post
    the first thing you need to do is make sure all your mirrors are at the same height. One of mine was a little lower and I couldn't get it to align.
    Great advice! I went back and re leveled the machine and I was able to get the first beam very very close within 30 minutes of playing with the adjustments. The machine turned out to be 0.5 degrees out of level. Tomorrow when I get some time, i'll look over the attached videos and give the 2nd beam axis a test go. thanks for the input!

    ps, I also learned the hard way how squeaky clean the mirrors need to be.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

80w chinese Y axis near/far field  beam alignment

80w chinese Y axis near/far field  beam alignment