3dprintforums logo



Results 1 to 3 of 3

Thread: PRC laser machine....info please

  1. #1
    Registered
    Join Date
    Oct 2005
    Location
    usa
    Posts
    97
    Downloads
    0
    Uploads
    0

    PRC laser machine....info please

    Wonder if anyone on this forum has experience with PRC lasers?
    They are located in NJ, and I am looking at one of their machines (used).
    I know nothing about Lasers. This machine is rated 440V 30 amp input,
    and I'm trying to find out what the cutting power would be.
    Also, if the company still supports this equipment.
    I have the model number but need to get the serial number.

    Email direct: DK1machine@yahoo.com

    thank you
    dk

    Similar Threads:


  2. #2
    Registered thebackshed's Avatar
    Join Date
    Jan 2006
    Location
    Australia
    Posts
    5
    Downloads
    0
    Uploads
    0
    We have a 5000 watt PRC. 2 years old now, only a few minor problems. Its had one HV powersupply fail, an output coupler replaced, and they upgraded the controllers for the turbines. Beam mode is good, overall not a bad machine. Its attached to a Ozy made BLS laser cutter. We are in north Australia, pretty hot and they had to make a few modification to keep the machine temperatures down, bigger chiller, etc.
    Glenn



  3. #3
    Registered
    Join Date
    Oct 2005
    Location
    usa
    Posts
    97
    Downloads
    0
    Uploads
    0
    I got the serial # and called PRC.....
    It's only about 450 watt....

    Not big enough

    dk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed