3dprintforums logo

CNCzone Network:  RFQwork :: 3Dprintforums :: Welderzone :: Google+ :: Our Facebook :: Twitter :: SiteMap



Results 1 to 2 of 2

Thread: MPC6515 not working

  1. #1
    Registered
    Join Date
    Mar 2012
    Location
    Ireland
    Posts
    5
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    MPC6515 not working

    problem with my mpc6515 it has lights flashing on it but wont intalize properly it was working fine day before i moved it across my shed and them it stoped working. 2 lights on the front board flashing the one on the left flashing on and off slower than the one on the right and on the main board the top led is flashing on and off about every second please help it is driving me nuts

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2007
    Location
    China
    Posts
    26
    Downloads
    0
    Uploads
    0
    Rep Power
    0
    does the MPC6515 casuse LED not light? If then, you can check the black wire between MPC6515 and LED.

    JENNY
    JENNY@wklaer.com



Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed