Additionally... I use mach 3 and aspire software. Is there any smaller complete 110v machines you all would recommend? Or maybe a solution to the issue in having with mine. Thanks again!
Hey fellas,
Had a issue with my cnc today for the first time in quite a while. For some reason it decided to plunge down about a mm while working the surface of the product. I had Dan Mauch do some work on my machine some years ago and he did a wonderful job. I know he recommended his stepper system. Just not sure if he is still around. I called the number listed on camtronics and it was out of service. Any help would be GREATLY appreciated. Thanks fellas!
Similar Threads:
Additionally... I use mach 3 and aspire software. Is there any smaller complete 110v machines you all would recommend? Or maybe a solution to the issue in having with mine. Thanks again!
How about a Taig? If your projects fit in its work envelope, it's the best little mill in its price range, 110v, and made in the USA. We sell them for a discount off list. What's the issue you're having? Haven't heard from Dan for quite a while...
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
Dan still posts on the Mach3 Yahoo group.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)