Biesse Rover 346 retrofit - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 21 of 21

Thread: Biesse Rover 346 retrofit

  1. #13
    Registered Dahlberg's Avatar
    Join Date
    Jan 2010
    Location
    Denmark
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    Quote Originally Posted by battwell View Post
    biesse have great frames. ive converted 2 to mach3. programming the drilling in an easy to use way was the most fun!
    here is mine
    That is very nice work to Battwell, maybe you can help me out with my convertion. I allready run Mach3, so I would like to convert it to a Mach3 or 4 machine as I allready know the program.
    Here is my machine.

    Colin

    Attached Thumbnails Attached Thumbnails Biesse Rover 346 retrofit-img_6187-jpg   Biesse Rover 346 retrofit-img_6188-jpg   Biesse Rover 346 retrofit-img_6189-jpg  


  2. #14
    Registered
    Join Date
    Feb 2008
    Location
    uk
    Posts
    448
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    if i was doing another one- id convert it using uccnc software.
    i have analogue control working via a galil controller.
    uccnc has a much better and more accurate motion planner than mach3.
    i use it on my other big machines.
    couldnt do this with mach 3 in cv mode.


    so much to learn, so much to pass on.


  3. #15
    Registered Dahlberg's Avatar
    Join Date
    Jan 2010
    Location
    Denmark
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    battwell I think I will go uccnc! it looks very versatile.
    What options do I have regarding motion controller??



  4. #16
    Registered
    Join Date
    Aug 2015
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    This is a great thread, good job on the conversion!!

    Sent from my SM-G900I using Tapatalk



  5. #17
    Registered
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    I do not know the UCCNC or whatever that controller is...lol, I use Linuxcnc and it is working amazing. Took me three weeks about to convert and 1000.00 worth of hardware.

    I am cutting my first job o it tomorrow. I have the Automatic tool changer left to do. All the other drills vert horiz had no problem with. I am building my plc program in Linuxcnc almost done for the tool changer.

    this is not a very complicated retrofit. There is alot to it but not that much. Just alot of inputs and more outputs. Even got my zones worked out with the green buttons and the safety sensors... It was a fun one to do.
    I am doing some detailed calibration on the axis.

    The Yawasaki drives are amazing and buiklt like tanks. Easy to interface with Linuxcnc, that was the easiest part. The Inverter for the spindles was pretty easy also. The worst part was figuring out the startup logic.
    After that it was a piece of cake. Could probably do the next one in two weeks or so.

    You will have fun if you choose a capable controller.

    Oh yeah, I have to do my button panel also.



  6. #18
    Registered
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    Cut my first pieces on the BS 346. Wow what a machine. I was 64th inch off @110" will regulate that tomorrow. Just a matter of scale for that axis.

    Now, to do the ATC....



  7. #19
    Registered
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    First job completed on the new machine. The machine is not finished yet but couldnt say no to this little contract.

    Machine ran real nice and smooth. More accurate than i can measure. I quoted 5.5 hours and the machine finished the job in 2 hours. The cut was in hdpe 1.5" thick and the finish was amazing....

    Attached a photo. How do i place inline?

    Attached Thumbnails Attached Thumbnails Biesse Rover 346 retrofit-img_0128-jpg  


  8. #20
    Registered
    Join Date
    May 2007
    Location
    Austria
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    I recently got a similar machine, a Biesse Rover 342, and already hate the built in control. Will probably also convert to LinuxCNC. Not quite sure how to handle all the spindles and stuff though.



  9. #21
    Registered
    Join Date
    Aug 2005
    Location
    Canada
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Biesse Rover 346 retrofit

    Quote Originally Posted by lbtrs View Post
    I recently got a similar machine, a Biesse Rover 342, and already hate the built in control. Will probably also convert to LinuxCNC. Not quite sure how to handle all the spindles and stuff though.
    I had the majority of the machine converted to linuxcnc in about3.5 weeks. I am working on a toolchanger scheme with spindle selection. It is 75% completed. Not that hard. Have to remap Tn M6 through python, and voila. Will upload video when completed. That and a button panel to finish, but I am cutting contracts on it already.

    Not that hard to do.



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Biesse Rover 346 retrofit
Biesse Rover 346 retrofit