sourcing parts


Results 1 to 4 of 4

Thread: sourcing parts

  1. #1
    Registered
    Join Date
    Mar 2015
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default sourcing parts

    i am on a show string budget to build my machine. I am needing to build a 5foot x 10 foot cutting area. Can any tell me the best place to get supplies like 80/20 extrusion linear shafting ect. I already have servos and controller so dont need any of that.

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: sourcing parts

    Where are you located?

    Shoestring budget and 5x10 machine don't usually go well together.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Mar 2015
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Re: sourcing parts

    i know they don't normaly go together but i already have all my wiring drives servo motors and controller im located in central Arkansas



  4. #4
    Member gio666's Avatar
    Join Date
    May 2008
    Location
    Canada
    Posts
    4068
    Downloads
    0
    Uploads
    0

    Default Re: sourcing parts

    Precision made aluminum profiles for DIY machines . All profiles fit 20and 25mm profile rails on ledge or pressed in 10mm round shafting to use U groove bearing .
    sourcing parts-8080-20mm-rail-jpg sourcing parts-80160-ballscrew-jpg sourcing parts-12363131_956933414396471_1392489443966049290_o-jpg
    sourcing parts-12339211_957934640963015_8502414007704380681_o-jpg

    Attached Thumbnails Attached Thumbnails sourcing parts-profile-10mm-rails-jpg  
    XZero cnc


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

sourcing parts

sourcing parts