Heidenhain TNC530 slow feedrate to toolchangepos.

Results 1 to 2 of 2

Thread: Heidenhain TNC530 slow feedrate to toolchangepos.

  1. #1
    Member
    Join Date
    Nov 2009
    Location
    DK
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Heidenhain TNC530 slow feedrate to toolchangepos.

    Hi ppl.


    My machine have a max feedrate of 30m/min but when i use "Toolcall xx" the feed to the changing position Is only 10m/min. My fix on till today is an extra line before toolcall, but think there is some parameter im missing.
    Does anyone know about this?

    Thx

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2011
    Location
    Hungary
    Posts
    99
    Downloads
    0
    Uploads
    0

    Default Re: Heidenhain TNC530 slow feedrate to toolchangepos.

    Contact OEM...

    Possible solution:
    Programming and editing / [MOD] key / 95148 [ENT] / MP data PLC Feed (vertical softkey) / to change "Value" / save (vertical softkey) / [END]



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Heidenhain TNC530 slow feedrate to toolchangepos.

Heidenhain TNC530 slow feedrate to toolchangepos.