- Heidenhain TNC530 slow feedrate to toolchangepos.
-
Member
Heidenhain TNC530 slow feedrate to toolchangepos.
Hi ppl.
My machine have a max feedrate of 30m/min but when i use "Toolcall xx" the feed to the changing position Is only 10m/min. My fix on till today is an extra line before toolcall, but think there is some parameter im missing.
Does anyone know about this?
Thx
Similar Threads:
-
-
Member
Re: Heidenhain TNC530 slow feedrate to toolchangepos.
Contact OEM...
Possible solution:
Programming and editing / [MOD] key / 95148 [ENT] / MP data PLC Feed (vertical softkey) / to change "Value" / save (vertical softkey) / [END]
- Heidenhain TNC530 slow feedrate to toolchangepos.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules