Robofil 510 System Software


Results 1 to 2 of 2

Thread: Robofil 510 System Software

  1. #1
    Member
    Join Date
    Jun 2012
    Location
    United States
    Posts
    516
    Downloads
    0
    Uploads
    0

    Default Robofil 510 System Software

    I've got a 510 machine that I recently acquired. I have the machine under power, but the batts were dead so there's nothing in the memory, just get a blank screen. I can get to the software loading screen by holding down a button on the control when I power the machine on.

    Anybody out there have the files from the old floppys? The machine I got came with a USB replacement for the discs installed. I'm having trouble tracking down the files from the previous owner, machine bought thru a dealer.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2012
    Location
    United States
    Posts
    516
    Downloads
    0
    Uploads
    0

    Default Re: Robofil 510 System Software

    got this problem solved, mostly.

    I was able to get the USB thumb drives from the previous machine owner. GFMS hung up on me when I tried to buy the software from them, fyi. (they're plenty happy to sell me resin bottles for example however...)

    I dont have the self diagnostic disc though. if anyone has that disc, would you contact me?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Robofil 510 System Software

Robofil 510 System Software