Need Help! Charmiles Robofil 440 Y over travel problem !


Results 1 to 2 of 2

Thread: Charmiles Robofil 440 Y over travel problem !

  1. #1
    Member
    Join Date
    Apr 2015
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Charmiles Robofil 440 Y over travel problem !

    Hello,
    We have Charmilles Robofill 440 machine, now we got and issue that Y - axis is over travel and we can't clear this error. What we try to do is first of all to go revers in hand mode to Y +, but nothing helped it moved a little bit and stop with error. Second thing we swithched off the machine and then moved Y + axis manualy in back of machine, we checked the belt on axis motor, everything looks fine. Now we got all axis blinking red that we have to go to reference point but we can't becouse of "Over travel " problem. Any ideas?

    Similar Threads:


  2. #2
    Member Accurate12's Avatar
    Join Date
    May 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Charmiles Robofil 440 Y over travel problem !

    Did you ever figure out your problem?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Charmiles Robofil 440 Y over travel problem !

Charmiles Robofil 440 Y over travel problem !