roboform c axis


Results 1 to 3 of 3

Thread: roboform c axis

  1. #1
    Registered
    Join Date
    Oct 2008
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default roboform c axis

    C axis is giving me problems, have had numerous errors, have run auto diagnostics and show no errors,(short test and long tests) c motor tries to turn c axis but acts like its locked, have tried unlock commands with no luck. switched drive cards around and can get it to move around 300 deg then it stops and error message, e624 or e623. when switch cards it disables other axis, wouldnt diagnostics show this as a bad board? would like to get c axis to move manually so I can use machine but cannot get brake to let go, anyone have any ideas? possible encoder on c axis ? any repair techs out there? charmilles suggest possible encoder cable break,or bad encoder? assume auto diagnostics would rule out bad board. checked voltage coming from board to c axis brake but have none either switched lock or unlock. keep coming back to bad board?
    rwk

    Similar Threads:


  2. #2
    Member mdynac's Avatar
    Join Date
    Jan 2006
    Location
    United States
    Posts
    104
    Downloads
    0
    Uploads
    0

    Default

    i can fix that board.
    pm me for more info.....

    michael

    Registered Linux User #348337
    EMC2 Rocks!!!!


  3. #3
    Registered
    Join Date
    Aug 2017
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: roboform c axis

    Did you fix it? The problem was the encoder or the Pcb?
    Thank you!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

roboform c axis

roboform c axis