Accutex EDM


Results 1 to 8 of 8

Thread: Accutex EDM

  1. #1
    Registered
    Join Date
    Dec 2012
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Accutex EDM

    Hi, is anybody using an Accutex machine on here? The place I work for is looking at a SP-300ia wire, and an Agiecharmilles Cut 20P. I ran wires for years, but mostly Sodicks, and haven't run one in about 10 years.
    Thanks!

    Similar Threads:


  2. #2
    Registered Wire-Tick's Avatar
    Join Date
    Oct 2012
    Location
    Germany
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    Hey,

    try to get a good offer for a Agiecharmilles Cut 300. Don´t take the Cut 20P if you want to be happy.
    Get offers from Sodick,Mitsubishi or Makino maybe.
    I never used Accutex, have no experience of them.

    Be sure what kind of accuracy and applications do you need.



  3. #3
    Registered
    Join Date
    Dec 2012
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I'm doing mostly form tools for screw machines, cutting T-15 HSS or carbide brazed to a 4140 steel body, usually 1.5"-2.5" thick. We will be doing some tapering for clearance on carbide inserts, which are between .25-.063 thick.



  4. #4
    Registered
    Join Date
    Dec 2012
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    We have 2 AccuteX machines. We bought an AU-500i new in October of 2007, and an SP-MED April of 2011. I have been the sole operator of both of them since purchasing. They have both been pretty trouble free machines.

    At a previous job, I ran a Mits FX-10K. I prefer our AccuteX machines. I can't compare them to Agie or Sodick because I've never used either.

    Let me know if you have any specific questions. I'll try to help you out.



  5. #5
    Registered
    Join Date
    Sep 2016
    Location
    China
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Accutex EDM

    i M come from China, accutex is my work. Let me know if you have any specific questions. I'll try to help you out.



  6. #6
    Registered
    Join Date
    Sep 2016
    Location
    China
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Accutex EDM

    HAHA ,you can find me,i run Accutex 6years.



  7. #7
    Registered
    Join Date
    Jun 2017
    Location
    Ukraine
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Accutex EDM

    Quote Originally Posted by fuxinhua View Post
    i M come from China, accutex is my work. Let me know if you have any specific questions. I'll try to help you out.
    Hello! We have purchased used Accutex SP-9i. Could you help me finding installation manual



  8. #8
    Registered
    Join Date
    May 2018
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Accutex EDM

    I recently bought a AccuteX AU-300iA.
    I keep getting U lag errors and then the machine will not clear the alarm till i shut it down.
    Any ideas?

    I cannot even get the wire to align.

    Last edited by EDMdepartment; 05-02-2018 at 07:48 AM. Reason: Adding to it


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Accutex EDM

Accutex EDM