plasma cnc


Results 1 to 3 of 3

Thread: plasma cnc

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    Spain
    Posts
    1
    Downloads
    0
    Uploads
    0

    Thumbs up plasma cnc

    hola a todos .
    tengo una mesa de plasma con la cotroladora desCNC y quería añadirle al eje Z un THC pero no lo tengo nada claro si puedo añadirlo,:no no: haber si alguien a montado alguno y puede ayudarme :

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2004
    Location
    United States
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default Re: plasma cnc

    Aqui tienes dos opciones:

    https://cnc4pc.com/non-contact-heigh...el-cutter.html

    https://cnc4pc.com/non-contact-heigh...el-cutter.html

    Arturo Duncan
    http://cnc4pc.com

    - - - Updated - - -

    https://cnc4pc.com/tmc3in1-torch-motion-controller-3in1.html

    https://cnc4pc.com/non-contact-height-sensor-for-plasma-and-oxy-fuel-cutter.html

    Arturo Duncan
    http://cnc4pc.com



  3. #3
    Registered
    Join Date
    Nov 2017
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: plasma cnc

    Se puede Montserrat, nos dedicamos a ello entre otras cosas. Oxiplasma - Fabricantes de mesas de corte por plasma y oxicorte., Llamanos y te indicamos la viabilidad del retrofit. Dame datos del modelo de maquina y cnc. Dispones de algo de material??



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

plasma cnc

plasma cnc