Looking for parts for a Koike PM2012


Results 1 to 4 of 4

Thread: Looking for parts for a Koike PM2012

  1. #1
    Registered
    Join Date
    Oct 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Looking for parts for a Koike PM2012

    I am looking for drive motor for a Koike model: PM 2012 plasma table. My company recently got a Prima Power CNC laser and our plasma table sat for a few months. We recently had a job we had to do on it. When we booted it up it would not move on one of he axis. After being on the phone with a repair company we found it was either the motor or the wire and both were discontinued. Is there a place that sells used parts or a way to search for them. Thanks for the help I am sure I will be poking around we have 4 different CNC's and I am fairly new to the industry but leaning fast.

    Similar Threads:


  2. #2
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: Looking for parts for a Koike PM2012

    What controller is it, some versions used a PC with a motion card such as Galil etc.
    What are details on the motor etc?
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


  3. #3
    Registered
    Join Date
    Oct 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Looking for parts for a Koike PM2012

    It is computer controlled K3po maybe runs windows 95 or XP. The motor is a Nema series Part number 700512. I guess I need o search that motor part number. Just talking this out is making some progress what else you got.



  4. #4
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Location
    Canada
    Posts
    24216
    Downloads
    0
    Uploads
    0

    Default Re: Looking for parts for a Koike PM2012

    Koike also used Acroloop board running under WIN.
    Any details of manuf. on the motor? any plate? is it DC (brushed motor), it should be easy to test.
    Al.

    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for parts for a Koike PM2012

Looking for parts for a Koike PM2012