Dimple where pierce is


Results 1 to 2 of 2

Thread: Dimple where pierce is

  1. #1
    Registered
    Join Date
    May 2016
    Location
    Australia
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Dimple where pierce is

    Hi everyone,

    We have noticed a problem with out cnc plasma where it leaves a dimple near the piece which we have to file off.
    Its become abit of a problem for us having to file everything.
    Ive attached afew photos if anyone has any ideas.

    We have tried making a huge leadin and out but its still doing it near the crossover.
    This is on 3mm aluminium and happens on steel aswell


    Thanks
    Adam

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Dimple where pierce is-20170618_123702-jpg  


  2. #2
    Registered
    Join Date
    Jun 2008
    Location
    USA
    Posts
    562
    Downloads
    0
    Uploads
    0

    Default Re: Dimple where pierce is

    What software are you using? It almost looks like the torch is shutting off for a split second and starting back up to finish the lead-out. How about some very short or no lead-out.
    You could try here: PlasmaSpider.com - Index page
    Or here: sheetcam.com :: Index Search overcut, it looks like that is what you need.

    Mike



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Dimple where pierce is

Dimple where pierce is