Need Help! THC issue


Results 1 to 2 of 2

Thread: THC issue

  1. #1
    Member makinnen's Avatar
    Join Date
    Jul 2012
    Location
    2222222222
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default THC issue

    Hi everyone,

    Can someone tell me an idea of what is wrong with my THC?
    When starting to run a program, the control performs a Position test, so the torch is approached to the sheetmetal but then keeps going up and down indefinitely. please see short video of movement.
    Is it the THC itself, or maybe the THC is not relaying the output signal from the limit switches to the control?

    Any thoughts would be much appreciated. Thank you!.

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Registered
    Join Date
    Sep 2017
    Location
    South Africa
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: THC issue

    Hi,

    Do you use a floating head or Ohmic sensing? How do you reference the torch-to-plate? If floating head, could be a connection issue.
    Does it have the same problem when the THC is not active?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

THC issue

THC issue