SAF Plasmatome HP

[darkoford]

I need a schematics and a service manual for this machine.

Thanks!
Darkoford

[darkoford]

I temporarily solved the problem and found the wires in the break but I'm still looking for a service manual.

Do not I clear what companies like SAF are that they can not get or buy service manual? They also do not have any service support.

[moepunk]

I temporarily solved the problem and found the wires in the break but I'm still looking for a service manual.

Do not I clear what companies like SAF are that they can not get or buy service manual? They also do not have any service support.

I have the same machine , i suffered for weeks to find anything , but the internet gave me nothing , i managed to contact someone from Air Liquide UK , and he sent me two or three files , i can send them to you , but i also need a favor ,

i have a problem with the SAFMATIC software on my machine , i have version 2.9.3 , are you able to send me the installation file ? even if a different version . i dont mind .

also can you tell me what your problem was with the machine ?

i have a problem with the Can bus protocol , my control unit does not recognize the generator .

[darkoford]

Thanks moepunk.

I did somehow repair the electronics but still look for schematics.
The program on the Burny 10 and NT Win 2000 machine. The program problem is that we do not have a password so I can not override the settings.

[moepunk]

please send me your email so i can send you the files i have .also if you can in anyway send me the installation file for the program i well really appreciate it .

my email is icwc_jo@yahoo.com .

regards

[akrab]

I need help to get Software for HPC of SAF PLASMATOME 20HP
The hard drive of my machine crashed, I need help to get a ghost image of a whole hard drive
Is there anyone who can help me? The machine is out of service now and my work is being destroyed

[darkoford]

What software was on the machine?

[akrab]

What software was on the machine?

its HPC v2.9

if you can, please help me to get a whole operating system image?

[darkoford]

Sorry, my machine uses Burny 10.

[darkoford]

Does anyone have a circut diagram or a photo of this PCB. Unknown pieces crowned red in the photo.
Saf Nertajet125

Thanks!
Darkoford

[polonadoo]

I have an image of plasmatome 35 if it can help you

[darkoford]

Thank you very much but the machine is not the same.

[MehdiJamshidi]

Hi
Plasma SAF-PRO(SAFMATIC)
Friends, you have a question about this plasma model, I can help