Try some Hiwin HGR15 linear rail and carriage.
Looking to put an air scribe on my home built, CandCNC table. I have everything for the scribe, but the current slide I have sucks. It is not stable when extended so the scribe gets drug around all over the place. What air slides, or other ways are you guys moving your scribes up and down? I really need about 6" to 8" of travel for the slide so I can use it on plate, and also on my tubing attachment.
Thanks, Matt
Similar Threads:
Try some Hiwin HGR15 linear rail and carriage.
Rod Webster
www.vmn.com.au