Need help lockformer vulcan 2000 - ud6.exe Waiting ...


Results 1 to 3 of 3

Thread: Need help lockformer vulcan 2000 - ud6.exe Waiting ...

  1. #1
    Member
    Join Date
    Apr 2017
    Location
    Belgium
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Need help lockformer vulcan 2000 - ud6.exe Waiting ...

    Hello i need help

    i'm resuming

    i have a lockformer vulcan 2000 with a controller Vulcan ( D6 / NEE GABRO CUTTER II)

    all the table is ok , but i want send files from profilemaster ( camduct )send with the machine to controller, i use the post processor D6 ESSI and the controller is on ESSI

    i use this settings
    bauds : 9600 ( exact in controller )
    handbrake : RTS (exact in controller )
    Data bits : 7 ( find on this forum )
    stop bit : 1 ( find on this forum )
    parity : even ( find on this forum )

    when i launch ud6.exe and make the controller on download i have nothing he just says : WAITING and the memory on the controller don't moove and on the portmon i have only ud6.exe get_comm_status

    when i go to test menu i have serial 1 in error : FIFO error and serial 2 FIFO ERROR , TX TO RX , but my cable is good is a null modem and rx is to the tx

    perhaps somebody have a experience with this machine


    Similar Threads:
    Attached Thumbnails Attached Thumbnails Need help lockformer vulcan 2000 - ud6.exe Waiting ...-test20170421_151227142-jpg  


  2. #2
    Member
    Join Date
    Apr 2017
    Location
    Belgium
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Need help lockformer vulcan 2000 - ud6.exe Waiting ...

    i have FIND ...

    he has 2 serial port but one is for a option fiber , and the fiber is HS on this ..

    i have disconnect the serial port and adapt this and it's work :-)



  3. #3
    Registered
    Join Date
    May 2017
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Need help lockformer vulcan 2000 - ud6.exe Waiting ...

    Did you ever find the problem??? I am having similar issues on mine



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help lockformer vulcan 2000 - ud6.exe Waiting ...

Need help lockformer vulcan 2000 - ud6.exe Waiting ...