Problem with heideinhain simulator


Results 1 to 8 of 8

Thread: Problem with heideinhain simulator

  1. #1
    Registered
    Join Date
    Sep 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Problem with heideinhain simulator

    Hi,

    I have little problem with my software don't know what's happen, but before everything was good, unfortunately when today I open, I cant find right panel (where is green start) all side gone.Is this my fault or I deleted some file? please see photo.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Problem with heideinhain simulator-heidenhain-jpg  


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    U are in program editing mode, right panel is active in work modes. Use program run button, or double arrows ring button.



  3. #3
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    U can also use a simulation mode (the button under programming and editing mode button)



  4. #4
    Registered
    Join Date
    Sep 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator



    Unfortunately, in any mode there is no right panel (blue marked) I try to reinstall and still same.

    Attached Thumbnails Attached Thumbnails Problem with heideinhain simulator-22-jpg  


  5. #5
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    If U use simulation mode Udon't need it. U use bottom line of function keysin there. I will check at work on monday if it can be changed in MP's.



  6. #6
    Registered
    Join Date
    Sep 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    Quote Originally Posted by steryd View Post
    If U use simulation mode Udon't need it. U use bottom line of function keysin there. I will check at work on monday if it can be changed in MP's.
    I reckon, it doesn't matter, because panel disappear from any mode (Manual, hand wheel, MDI, test run, single or full run)



  7. #7
    Registered
    Join Date
    Sep 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    Ok I fixed, reinstalled with different location and its come back, thanks for your help steryd anyway



  8. #8
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with heideinhain simulator

    U just needed to reload PLC program with default settings



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with heideinhain simulator

Problem with heideinhain simulator