Picked up an old Tarus CM5P


Results 1 to 1 of 1

Thread: Picked up an old Tarus CM5P

  1. #1
    Registered
    Join Date
    Sep 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Picked up an old Tarus CM5P

    Hello, First time to this great site. I picked up an old working, good condition Tarus CM5P. The deal was too good to pass up. I wanted to look for advice on retrofitting it with modern hardware without spending 10's of thousands of dollars. For example, I for sure need a newcontroller/computer for it replacing the antique control station. Maybe wishful thinking but will Mach 4 CNC motion control software work? or will have to spend a ton of money on a Siemens or MachMotion retrofit kit? I guess the above are the most pressing......and a start. Appreciate any constructive feedback on how to approach the modernization of this relic. Thanks, Bob

    Similar Threads:
    Last edited by MinusApex; 09-18-2016 at 05:28 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Picked up an old Tarus CM5P

Picked up an old Tarus CM5P