Matsuura with Yasnac MX3 helical interpolation


Results 1 to 3 of 3

Thread: Matsuura with Yasnac MX3 helical interpolation

  1. #1
    Registered
    Join Date
    Aug 2008
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Matsuura with Yasnac MX3 helical interpolation

    I have a Masuura 560V with a Yasnac MX3 control. According to my manual helical interpolation was optional for this machine/controller. Does anyone know how to tell if I have that option installed? Or how to get it if I don't?

    Thanks for any help.
    Marc

    Similar Threads:


  2. #2
    Member dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2932
    Downloads
    0
    Uploads
    0

    Default

    IIRC, the Matsuura's had Helical Interpolation as standard. Have you tried programming a helix? Do you get an alarm?



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    I haven't tried it yet. I'll give it a go and see what happens. The G2 and G3 are circular if the option isn't installed so I guess nothing catastrophic will happen if I just give it a try.

    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Matsuura with Yasnac MX3 helical interpolation

Matsuura with Yasnac MX3 helical interpolation