Need Help! NVEM Ethernet controller custom mpg


Results 1 to 2 of 2

Thread: NVEM Ethernet controller custom mpg

  1. #1
    Registered greekart's Avatar
    Join Date
    Mar 2015
    Location
    Athens
    Posts
    4
    Downloads
    0
    Uploads
    0

    Question NVEM Ethernet controller custom mpg

    Hello guys, i have NVEM 6 axis ethernet controller and i want to use the pins for mpg with custom buttons e.t.c

    I connect everything and i can change Axis selection and probably Step selection, but i have no idea how/with what to control the movement from WHA+ WHA- pinout.

    I have a PS1010-20 Switch pulse rotary and thought i could but i can't find what i am doing wrong if it could.

    The pulse rotary need to add +dc voltage and gnd? Not enough pins for that

    Can you help me or point me the right direction to make it happened?

    NVEM Ethernet controller custom mpg-mpg_pinout-png NVEM Ethernet controller custom mpg-ps1010-20-jpg

    Thanks in advance

    Similar Threads:


  2. #2
    Registered greekart's Avatar
    Join Date
    Mar 2015
    Location
    Athens
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: NVEM Ethernet controller custom mpg

    No one have any idea? I use all combinations and nothing .

    Now i get this one https://www.ebay.com/itm/Rotary-Encoder-400P-R-6mm-Incremental-Optical-Shaft-Working-Measurement-5-2-Y0A1/252862587483?epid=857636894&hash=item3adfc8e25b:g0gAAOSwc-tY7yh9

    but again nothing change. I am thinking about the plugin of the board may is not the right even if i try all i find.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NVEM Ethernet controller custom mpg

NVEM Ethernet controller custom mpg