Check out flexible conduit, either plastic or metallic, and MTW/TEW single conductor stranded.
Usually best if you twist the conductor pairs together as much as possible.
,Al.
I'm working on sourcing components to hook up a Colombo spindle. The spindle needs a specialized power cable.
8 conductors. 4 - 12 gauge and 4 -16 gauge.
Describes like this...
Power Cable (3+T) x 4.0 mmq + 2x1+2x1.5 mmq SK
Includes 12 Gauge Wire for Primary Conductors - Outside Diameter: 16.0mm
I was quoted $45 a meter. Hoping to find it a bit cheaper.
Similar Threads:
Check out flexible conduit, either plastic or metallic, and MTW/TEW single conductor stranded.
Usually best if you twist the conductor pairs together as much as possible.
,Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I know there are threaded adapters from MS connectors to conduit, if they use the same threads as MS then that would be an option.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
This is the ones i have used in the past, I bet the smaller one is the same as MS.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.