Looks basically OK, although there should be an inclusion in it for E-stop shut off.
Al.
Could someone have a peek at this please. I posted earier but not sure if it went through.Thanks.
Similar Threads:
Looks basically OK, although there should be an inclusion in it for E-stop shut off.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Thanks Al now coming from a newbie to all this does the estop get wired inline on the white side. This is one of the components i did not look into. Thanks
In the power side same as the fuse conductor, it is not normal to switch the neutral or usually necessary to also switch the N..
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Thanks Al will do.
That would work but usually it is incorporated with one that also shuts the spindle off.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Normally use the Red side it is N.C. that is the one you use, Green is N.O.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.