High amp driver board

[jimglass]

I'm already using a Xylotex driver board on some 60oz/in stepper motors. They are doing upgrades at work and are changing out some 450 oz/in steppers with servo motors. I already have 3 or 4 of the 450 oz/in motor in my basement. I'm looking to use them on my next project. What driver board would I use on these large stepper motors.

Thank,
Jim Glass

Similar Threads:

• Replacing TB6560 driver board's driver chip. Is it possible?
• Cheap Unipolar LPT Driver, High Amperes
• High side driver
• Very High cost-efficient BLDC Driver
• What would you like to see on an UHU High Power board

[balsaman]

Need more info. What current and voltage? What about the driver that was in the equipment being upgraded?

Eric