Reply with QuoteA USB to parallel adapter cable will NOT work with Mach3.
If you don't have a parallel port, you either need to add a PCI parallel port card or use a USB motion controller like the UC-100
need help for wirring and so...
hello bro how is going? bee here ,and i have many problem to wirring system of my simple breakout board from ebuy.
so my story begings form this breakout board TK0457 5 Axis, i did wired pin port and usb power, i did buy pin port 25 usb cable from ebuy to
USB to 25 Pin Female Parallel Printer Adapter Cable PC | eBay
but when i connection to my pc its dosent work like normal!
from device maneger writting only printer usb support and breakout board not working when i open Mach 3?
i made it config. of pin&ports and signal, outputs and esc. from manuel user guide for TK0457 from e buy.
i looked many forms why dosent work and nothing! i have win7 and xp two of them didnt work for pin 25 usb cable also installed to driver for cable
can you tell me how we can fixed this things?
Similar Threads:
- Need Help!- Hardinge GT27SP wirring needed
- Need Help!- AC TO DC WIRRING
- Maho 400P Wirring diagram
- Xylotex drive wirring help plz.
A USB to parallel adapter cable will NOT work with Mach3.
If you don't have a parallel port, you either need to add a PCI parallel port card or use a USB motion controller like the UC-100
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
