PDJ PILOT PRO CNC GREAT CUSTOMERS and GREAT CUSTOMER SERVICE

[SuzettePilotPro]

I am delighted with the machine, and I am very excited anytime I do anything at all on it. So far I have worked on a small workbench that appeared in a recent issue of one of the Woodworking magazines (American Woodworker, perhaps? but I am not certain -- if you want to know I can tell you once I verify it at home). I used the CNC machine to cut the parts out and to drill the dog holes. The parts are all cut and drilled, and they fit quite well, but I still have some assembly work to finish it. So far I have only used CamBam to enter the designs and create the Gcode since the designs were quite simple and easily within the capabilities of CamBam. I also did a small surfacing part of this project directly in Gcode, just to verify that I was gaining some knowledge of Gcode. Thank you very much, and you can certainly count me as one of your satisfied customers..Doug S

Similar Threads:

• Built a path pilot controller works great
• Great customer support
• Geckodrive = great customer support!