Quick question regarding G540 box...

[stombory]

I see that a lot of you use a standard looking box with a large switch on it, similar to this one I found on keling.

I want to know, where can I get a box similar to this?



Thanks in advance. My G540 should be in this week, and I want to get it started ASAP. Also, which type of powersupply are you guys using?

[devincox]

I'm using the keling KL-5010 power supply. I am building the electronics into my enclosure.


===============================================
KL- 5010 : $149/pcs Specification:
Unregulated Power Supply 500W, 50VDC/10A , Input: 120VAC
or 230VAC
Note: The transformer is CE certified

[stombory]

Originally Posted by devincox I'm using the keling KL-5010 power supply. I am building the electronics into my enclosure. =============================================== KL- 5010 : $149/pcs Specification: Unregulated Power Supply 500W, 50VDC/10A , Input: 120VAC or 230VAC Note: The transformer is CE certified

That is genius! I love that idea. I'm going to do the same thing now.

[stombory]

I'd still like to know where I can find a box though!

[devincox]

Stombory,
you might try Bill at grifftek.com.

http://www.grifftek.com/misc.htm
Look in the center of the pics.

I have bought two of those exact boxes from him with some really nice cnc kits he sold me. I saw one on his misc for sale page, so he might have one he could sell you.

Regards,
Devin

[phomann]

Originally Posted by stombory I see that a lot of you use a standard looking box with a large switch on it, similar to this one I found on keling. I want to know, where can I get a box similar to this? Thanks in advance. My G540 should be in this week, and I want to get it started ASAP. Also, which type of powersupply are you guys using?

That's one of the scariest looking controllers I've seen in a while.

Presumably, 2 of those IEC plugs are outputs. either with mains on them switched by relays, or maybe the relay control outputs from the G540.

In either case it looks like a death trap!


They should at least be changed to IEC plugs


Cheers,

Peter.

[Kelinginc]

Originally Posted by stombory I'd still like to know where I can find a box though!

we have KL-G540-48 4 Axis G540 CNC Stepper Motor Driver Controller. It is on sale
http://www.kelinginc.net/ControlSystem.html

[devincox]

Originally Posted by stombory I'd still like to know where I can find a box though!

Found a specifically for the 540 here:
http://s120220635.onlinehome.us/stepper-components.asp


Devin