| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-14-2009, 03:17 PM
| |||
| |||
Hi I'm using the 212. I connected ports 9 (step pulse) and 10 (common) to a function generator at 10 Hz and 5 Volts. My stepper motor moves but I want it to also move in the other direction. I don't know where to connect the direction port to. I have a variable DC power supply. I tried giving the direction a voltage but it doesn't seem to do anything. Help!  |
|
#2
08-15-2009, 03:54 PM
| ||||
| ||||
| GND?  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| plz need help stepper no change direction | chawkiz | Open Source Controller Boards | 0 | 03-07-2009 03:07 AM |
| Help Please:- Stepper Not Changing Direction | audioandy1762 | General Electronics Discussion | 1 | 11-07-2007 04:15 PM |
| Stepper turns only one direction | jhowelb | Stepper Motors and Drives | 0 | 10-03-2007 07:52 PM |
| Stepper only going in one direction? | ScuD | Stepper Motors and Drives | 7 | 12-09-2005 05:28 AM |
| Stepper rough 1 direction | randyf1965 | PicStep Controllers | 6 | 05-25-2005 02:17 PM |
| | |
Linear Mode
