| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#14
 
10-05-2008, 05:14 PM
| |||
| |||
| thank you guys  |
|
#15
10-07-2008, 10:30 AM
| |||
| |||
| 1/4 Watt resistors are physically smaller and easily fit between the DB9 connector pins 1 and 5. 1/2W resistors are too big to easily fit and may even interfere with the supplied DB9 connector clam-shell covers. If they do, the pressure from the clam-shells may push the resistor leads into contact with the motor wire connections. Please use 1/4W or smaller resistors for setting the axis current. Mariss |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How fast is this? | jmytyk | DIY-CNC Router Table Machines | 8 | 02-07-2009 05:41 AM |
| How fast can a bit cut | camcam | Open Source CNC Machine Designs | 5 | 05-24-2008 04:07 PM |
| How Fast is Your Joe | bearwen | Joes CNC Model 2006 | 4 | 08-29-2007 07:29 PM |
| How Fast is too fast? | lgalla | Linear and Rotary Motion | 2 | 04-29-2007 07:38 AM |
| Do you have a fast DSL? Help! | ESjaavik | CNCzone Club House | 11 | 08-18-2004 09:25 AM |
| | |
Linear Mode
