| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-27-2008, 07:00 PM
| |||
| |||
I've been unable to locate the recommended wattage for the current set resistor. Does anyone know what the minimum resistor wattage is for the 201s? Best Regards. Carl    |
|
#2
04-27-2008, 07:29 PM
| |||
| |||
| Hi Carl, This info is from the G201 Installation notes: "Before you start, you must have a suitable step motor, a DC power supply suitable for the motor and a current set resistor. The motor’s rated phase current must be between 0.3 Amp and 7 Amps. The power supply voltage must be between 4 times and 20 times the motor’s rated voltage. The current set resistor may be a 1/4 Watt, 5% part. Finally have a STEP and DIRECTION pulse source available."
__________________ Diplomacy is the art of saying "Nice doggie" until you can find a rock. - Will Rogers |
|
#3
04-27-2008, 07:42 PM
| |||
| |||
| My appologies for overlooking that. Thanks for the quickly reply. Best Regards. Carl |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Current set resistor-G203v | C.Michael | Gecko Drives | 7 | 02-02-2008 05:22 PM |
| Please help, current limit resistor calculations | scratch_6057 | Open Source Controller Boards | 5 | 01-24-2007 09:49 AM |
| Help with current set resistor math | Hack | Gecko Drives | 9 | 04-29-2006 12:07 PM |
| Current limiting resistor | pyrojon | General Electronics Discussion | 8 | 04-19-2005 09:47 PM |
| Current Set Resistor | CRFultz | Gecko Drives | 0 | 08-06-2004 01:48 PM |
| | |
Linear Mode
