| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-04-2007, 05:54 PM
| |||
| |||
can any one suggest correct Gecko drive for my Lathe motors SEM MT30E4 D.C. servo motors Max Volts 140 Current at peak torque 13amps max rpm 2700 I emailed Gecko but got no reply Thanks Brian
__________________ BR  |
|
#2
09-04-2007, 06:15 PM
| ||||
| ||||
| Geckos are limited to 80V max, which will only give you about half your top speed. You might want to look at larken drives. http://www.larkencnc.com/viper/v200.htm
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gecko 320 | Ed Williams | Gecko Drives | 1 | 05-17-2006 08:17 PM |
| Gecko 210 Help... | Gads | Gecko Drives | 4 | 03-23-2006 11:36 AM |
| Sure looks like gecko.... | mdoan | Gecko Drives | 1 | 10-27-2004 05:43 PM |
| To Gecko, or not to Gecko...that is the question! | samualt | Gecko Drives | 11 | 09-22-2003 08:42 PM |
| Does Gecko | cncman2 | Gecko Drives | 8 | 03-24-2003 05:12 PM |
| | |
Linear Mode
