| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-28-2007, 06:58 PM
| |||
| |||
Hello all, I'm rebuilding another drive for my router using Gecko 201's. The spec sheet states using a 470uF 100V Capacitor across the drives power terminals. I'm having trouble sourcing a capacitor to that volyage rating. Could I use a 470uF 63V instead. The motors are 4Volt 2Amp Nema 24's. The power supply puts out 50 Volts. Thanks Cam  |
|
#2
04-28-2007, 08:15 PM
| |||
| |||
| You don't need the capacitor if your phase current is 3A or less. Otherwise go to www.digikey.com and order up some P10874-ND parts at $2.47 each. Mariss |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Which Gecko Drive | Lloyd | Gecko Drives | 5 | 05-31-2006 01:35 AM |
| Gecko Stepper Drive Box | camsoft | Gecko Drives | 0 | 05-23-2006 05:34 PM |
| Help-2 steppers/one gecko drive | Jersey | Gecko Drives | 2 | 05-12-2006 12:57 AM |
| Can Gecko drive this motor? | N4NV | Gecko Drives | 8 | 02-27-2006 10:55 PM |
| | |
Linear Mode
