Star wiring & microswitch power supply

[szynszyl]

If I have n°3 Gecko and a microswitch power supply with n°2exit (V+;V+) / (V-;V-) I mantain star wiring layout but i'm forced to put two wires in the same exit, do you agree? could you confirm ?

Thanks
Bye

[Kipper]

Originally Posted by szynszyl If I have n°3 Gecko and a microswitch power supply with n°2exit (V+;V+) / (V-;V-) I mantain star wiring layout but i'm forced to put two wires in the same exit, do you agree? could you confirm ? Thanks Bye

If I understand you correctly, you have 3 Gecko's and a switching PSU with 2+ (positive/plus) and 2- (negative/minus) output rails? in that case you have 2 rails and 3 drives which means you have to place 2 in a single socket. Is the "A" rating high enough to run 2 Gecko's from one rail i.e. what current is required by the drivers and supplied by the PSU on each rail? More information may be needed before anyone jumps in and says "yes that is OK" hth