| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-13-2007, 09:28 PM
| |||
| |||
I made a Matsuura 500 retrofit with G-100 and G 320. Finally it works good, fast and powerfull, but when had been passed some time the machine lose the cero piece on Z. I tried change the speed in the motor configuration, but it still the same. Can somebody know what is happening and how can help me with some tips to try for fix it?  |
|
#2
04-13-2007, 11:02 PM
| ||||
| ||||
| You can get Yasnac Control information at this site http://www.yaskawa.com/site/Support....ntrollers.html You can also download the Manuals  Cheers!!!!!!!!
__________________ Toby D. "Imagination and Memory are but one thing, but for divers considerations have divers names" Schwarzwald (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) www.refractotech.com |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Matsuura MC-500V Tool Changer Problem | nlh | General Metal Working Machines | 25 | 03-06-2011 04:50 PM |
| MP for Matsuura MC-760 | macds | Post Processor Files | 18 | 07-18-2008 01:26 PM |
| g320 question | h_2_o | Gecko Drives | 4 | 11-21-2006 11:15 AM |
| Matsuura Horizontal Help Needed | cruizer67 | General Metal Working Machines | 3 | 10-20-2006 12:10 PM |
| Controller With G320 | kkilst | Gecko Drives | 1 | 05-10-2006 08:07 AM |
| | |
Linear Mode
