| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-04-2007, 02:07 PM
| |||
| |||
I use G320 and Mach3 to turn my servo. My servo turns CW perfect but when I try CCW G320 fails. I tried to reverse encoder and motor power leads. Nothing changed. Again motor turns CW perfect but can not turn CCW. My direction signal is correct. when I reverse encoder and motor leads I have to press negative X jog button to turn motor CW. Before changing leads I have to press positive X jog button. Is there anyone who has experience about motors turning only one direction  
__________________ Gunol Camlibel gunolcamlibel@rc-tuning.com http://www.rc-tuning.com  |
|
#2
03-05-2007, 01:35 PM
| |||
| |||
| Today I disconnected all wires and reconnect them with fresh mind. Now my motor turns perfect. Thanks for reading. Sorry for taking your time
__________________ Gunol Camlibel gunolcamlibel@rc-tuning.com http://www.rc-tuning.com |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with servo controller (G320) | faststeve | Gecko Drives | 19 | 04-03-2007 08:18 PM |
| Some servo help and questions about the G320/340 | Eson | Gecko Drives | 0 | 02-07-2007 03:01 PM |
| g320 48v servo will this work | dgalaxy | Gecko Drives | 0 | 05-29-2006 08:10 PM |
| G320 Fault light doesn't turn off | lamote | Gecko Drives | 0 | 04-11-2005 04:39 AM |
| G320 and back-EMF from servo | rc-cellar | Gecko Drives | 5 | 02-17-2005 09:15 PM |
| | |
Linear Mode
