| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-23-2006, 08:00 AM
| |||
| |||
Hi All: I am in the midst of wiring Gecko G201's and have noticed that terminal 10 is marked "common" instead of "5VDC" as in the documentation. Is anyone familiar with this discrepancy and can someone tell me just where to connect this terminal? Thanks lewenz@sbcglobal.net  |
|
#2
12-23-2006, 08:06 AM
| ||||
| ||||
| Hey Lew! Common is the 5 volt input. Don't ask me why it is labeled that way. ON my G320's I get the 5 volts from my computer power supply. Just used a USB cable with only the 5 volts hooked up. I know there are other ways to do it but it worked for me! Have a nice day and good luck. Bill
__________________ billyjack Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>) |
|
#3
12-23-2006, 08:48 AM
| |||
| |||
| Thanks for the info. I did see elsewhere in some posts that "common" and +5VDC were used interchangeably. I did need some degree of confidence. So, thanks again for the quick reply. lewenz@sbcglobal.net |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
