Divorce forces sale of complete Gecko cnc/servo package.

[jeremysartor]

I know this probably not the right place for this and I apologize in advance if it isn't but here goes. My wife (soon to be ex) and I are finalizing our divorce and unfortunatly I am out of money. I have been collecting this equipment which is mostly new for over a year now to construct a machine for my metal/art studio. Priced for a quick sale my loss is your gain. I need $2000 for the following:

please go to my website for more details and photos at http://www.jeremysartor.com/coppermine/

-3 1100 Oz In peak brushed servo motors with 80volt capacity
-2 complete US Digital optical encoders and a third that is missing a disc
-3 Gecko 340 Servo Controllers
-2 break out boards
-1 diagnostic tool for determining signal and trouble shooting
-13 Precision V-Bearings with eccentric bushings for adjustment
-1 Heavy duty power supply (around 30 amps peak 14 cont) 75 volts

Regards,

Jeremy Sartor
Dallas, Texas
Cell 214-283-4407

[braidmeister]

Jeremy,
What size are the motors? Nema34 or Nema42?

Thanks!
-Brady