Can G202's drive these motors ??

[richyrich212t]

Hi all,

Just wondering if a G202 can drive these motors in a series or parallel config.

640 oz/in Model # RHT34-640

Holding torque-Nm (oz/in) +/- 10% 4.6 (640)
Rated voltage 2.3
Rated current per phase (amps DC) 5.5
Resistance (Ohms) +/- 10% 0.42
Induction (mH) +/- 20% typical 3.5
Motor length (mm) 80
Rotor inertia (g-cm^2) 1400
Weight (kg) 2.3

thanks

[Mariss Freimanis]

Yes. Do not use a power supply voltage higher than 48VDC with that motor.

Mariss

[richyrich212t]

thanks for the reply mariss. I was thinking of using the x20 rule and using a supply around 2.3*20=46vdc -=-

Would you suggest something lower maybe ??

[Dan Mauch]

If you need one contact me off line for a 36V DC power supply that will be perfect for those motors.