- Lcd Thermometer for Gecko
-
Registered
Lcd Thermometer for Gecko
I wanted to keep track the temperature of my Gecko g540, and since I had an arduino uno, I thought to make a thermometer out of it.
It needs an Lcd screen and some other electronic parts, a temperature sensor, a 10k trimmer, a resistor and some cables.
The total cost is about 11 euros.
The lcd is on the control panel I have created, along with all the other control buttons, for vacuum, dust collection. etc.
The temperature sensor is attached to the back side of the gecko with some hot glue.
It works great and I can watch the g540 temperature every 2 seconds.
I have attached the images of the 2 pcbs I have designed.
If anyone is interested in creating something similar, just send me a mail for the dxf files.
Similar Threads:
-
-
Registered
18b20.dxfg540.dxf
Here are the dxf iles
- Lcd Thermometer for Gecko
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules