G540 Mach3 Display Issues & Slave Axis Issues - CNCzone.com-The Largest Machinist Community on the net!

umustsurf · #1 09-29-2011, 09:12 PM

So the xml profile for Mach3 that Gecko provides takes my old CNC files and makes them look like swiss cheese. So I took all the settings and put them into Mach3's stock configuration and the slave Axis option does not power my A axis? I don't care which Mach3 profile I use so I just want to fix either problem so I can run.

Thanks:}

umustsurf · #2 09-29-2011, 09:14 PM

figured out the slave axis issue....Outputs for the slave A axis were not set like the other motors.....oooops.

I would still like to know why Gecko's profile for Mach3 makes my programs look like swiss cheese?

umustsurf · #3 09-29-2011, 09:23 PM

Slaved A axis didn't have the step and direction pins programmed in the old version of Mach3.

Still wondering how to get Gecko's Mach3 profile to not make my CNC programs look like swiss cheese....but I'll settle for the old profile working for now.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SprutCAM 7 1.4 Display speed issues	dblox	SprutCAM	2	08-01-2011 05:54 PM
chain graphics display issues	david martin	Mastercam	2	06-09-2011 10:51 PM
Need Help!- G540 PC comunication issues...	CNC74	Gecko Drives	2	02-10-2010 10:15 AM
Display Issues - please help	jpf44	Alibre Design	5	06-13-2008 08:31 PM
BP Series 1 with Mach3- Z axis limits issues	bbuonomo	Bridgeport and Hardinge Mills	6	10-13-2006 04:39 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)