Need Help!- buy g540 3 axis kit suggestion

[bel630]

i have built my 4'x3' wood 3 axis router... now planning to buy all electronic 3 axis kit from keling.. can anyone suggest me a a good kit for my router

1) Geckodiver G540 3 axis kit (one G540 + one NEMA 34
KL34H295-43-8B, 906 oz-in +Two NEMA 23 KL23H2100-35-
4B (1/4” Dual shaft with a flat) 381 oz-in + one KL-600-48
48V/12.5A 115V /230V
power supply): $581.95

or

2) Gecko Diver G540 3 axis package (One G540 + Three NEMA 34
KL34H260-35-4B (1/2" Dual Shaft ) 465 oz-in + one KL-350-48
48V/7.3A 115V /230V power supply: $545.95

why keling give 12.5a power supply for kit 1 but just give 7.3a for kit 2?

[LUCKY13]

Did you ever get figured out what you need here?


I thihnk it would help to give details of how your system is built. It might also help to post a thread in the build section. A lot depends on the type screws you used and how the machine is built.

AS far as amp rating on PS for the kits IDK the answer. You could always ask them to upgrade the PS to the bigger one in a kit if you had conserns. The bigger PS would not have to work as hard this way if it didnt really need the extra power.

Jess

[dmauch]

Either system would require 6.3A. so the motors would go with either. If you even think of a possibility that you may add a 4th motor then go with the 12 A PS.

Dan Mauch
Camtronics, inc. -- CNC with Dan Mauch

Originally Posted by bel630 i have built my 4'x3' wood 3 axis router... now planning to buy all electronic 3 axis kit from keling.. can anyone suggest me a a good kit for my router 1) Geckodiver G540 3 axis kit (one G540 + one NEMA 34 KL34H295-43-8B, 906 oz-in +Two NEMA 23 KL23H2100-35- 4B (1/4” Dual shaft with a flat) 381 oz-in + one KL-600-48 48V/12.5A 115V /230V power supply): $581.95 or 2) Gecko Diver G540 3 axis package (One G540 + Three NEMA 34 KL34H260-35-4B (1/2" Dual Shaft ) 465 oz-in + one KL-350-48 48V/7.3A 115V /230V power supply: $545.95 why keling give 12.5a power supply for kit 1 but just give 7.3a for kit 2?