| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-24-2011, 08:17 PM
| |||
| |||
According to the documentation on the cover of the G540, I would assume only pins 6,7,8&9 are used for the stepper, pins 1&5 are used for the resistance value leaving pins 2,3&4 unused. Is this correct?  |
|
#4
06-30-2011, 09:52 PM
| ||||
| ||||
| I believe those pins are grounded and can be used to ground cable shielding.
__________________ Http://www.glenspeymillworks.com *Techno LC4896 - 2.2Kw Water Cooled Spindle | *Moving Table Mill from an Omis 3 CMM, 500Lb granite base, Hitachi router, Mach3 |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| G540 and an MPG | eaglezsoar | Gecko Drives | 3 | 06-29-2010 02:51 PM |
| G540 PWM | mikie | Gecko Drives | 0 | 05-21-2010 12:50 AM |
| What can i do with a G540 | matttargett4 | Gecko Drives | 2 | 03-04-2010 10:24 AM |
| Hot G540 | jdemille | Gecko Drives | 1 | 05-08-2009 12:40 PM |
| G540 - WOW! | LaserImage | Gecko Drives | 6 | 12-04-2008 03:30 PM |
| | |
Linear Mode
